Gus Berthold Electric Company
Home  |  Contact Us   
Gus Berthold Electric Company
PRODUCTS
Low & Medium Voltage Switchboards
Panelboards
Generator Connection Cabinets
Industrial/Lighting/Motor Controls
Wall Mounted Combination Motor Starter Cabinets
Custom Enclosures
UL Listed DC Busways
DC Distribution Products
Obsolete Molded Case Circuit Breakers
Temporary Distribution Panels
Temporary Service Equipment
RAPID-FAB
 
BDCBB

BATTERY DISTRIBUTION CIRCUIT BREAKER BAYS

DISTRIBUTION BAY DESCRIPTION:

The Secondary Power Distribution Bay can be configured from one to six load positions. The input bus for each load can be set up for either top or bottom feed, and be equipped with a 800A metering shunt. All load cables can be routed either out the top or bottom of the cabinet, and be secured to cable tie down brackets. The cabinet can be ordered with either an internal or external ground return bus assembly.

DISTRIBUTION BAY SPECIFICATIONS:

All Secondary Distribution Bays are rated 600A, 48VDC. Each section can accommodate circuit breakers ranging from 1A up to 100A, and can be supplied with a two-hole load lug detail. The cabinet is constructed from 14ga. steel, with the frame and all interior parts arc-welded in place. Overall cabinet dimensions are as follows: Height 84", Width 30", Depth 18", Weight approximately 350 lbs.
 
 
DISTRIBUTION BAY FEATURES:
  • One to six feeds
  • Digital Voltmeter with Red LED
  • Digital Ammeter with Green LED
  • Voltage Test Points
  • Accommodates both Top and Bottom input feeds
  • Internal or External Ground Return Bus Assembly
  • 800A, 50mv Metering Shunts
  • Front interior hinged circuit breaker installation doors
  • Removable side covers
  • Welded construction
  • Hinged Meter Panel
  • Pre-drilled frame ground holes in top of cabinet
  • Silverplated Busbar
 		CIRCUIT BREAKER FEATURES:
  • Available in amperages from 1A up to 100A
  • Rated 80VDC
  • Standard Interrupting Rating 10,000A @ 80VDC
  • High Interrupting Rating 50,000A @ 80VDC
  • Mid-trip alarm switch
  • Custom marked handles
  • Custom designed load isolation barrier
  • Two-hole lug termination detail

 
 
Entire contents © 2006 Gus Berthold Electric Company. All rights reserved. Reproduction of this information in any form without prior written permission is forbidden. Gus Bethold Electric Company disclaims all warranties as to the accuracy, completeness or adequacy of such information.